Project time: 45-60 minutes depending on radiator size
Radiators are a focal point in almost every room of the home which can become an eyesore if they discolour and scratch over the years. To combat this, many choose to install expensive radiator covers which can take up valuable space and block heat. But did you know that you could simply paint your radiators to get them looking good as new?
There’s no need to splash out when making your home look wonderful, a glamorous finish can be achieved quickly and easily with a lick of ultra-tough, heat resistant Radiator Enamel from Rust-Oleum.
And radiators need no longer be only white, Rust-Oleum Radiator Enamel is available in in six colours including Chrome, Silver, Cast Iron, White and Heirloom White.
Radiator Enamel - Cast Iron
Tools needed:
· Rust-Oleum Radiator Enamel
· Rust-Oleum Surface Primer
· Old newspaper/ dust sheets
· Masking tape
Step one
Ensure the surface of the radiator is clean and remove all traces of dirt and grease with hot, soapy water and leave to dry.
Step two
Ensure the area in which you are working is well ventilated and cover the area with newspaper to protect floors/ surfaces. Use masking tape to protect pipes/ valves that you do not want to be sprayed.
Step three
Sand any areas where paint is flaking and where there is bare metal or rust, ensure this is treated with Rust-Oleum Surface Primer.
Step four
Spray radiator evenly with your chosen colour, using steady strokes from left to right, keeping the can moving at all times. Ensure you follow the instructions on the can.
Rust-Oleum products are available from Homebase, B&Q and other leading stockists.
- Rust-Oleum Radiator Enamel Paint - 400ml RRP £9.49
For more information on Rust-Oleum products visit www.rustoleumspraypaint.com.